Texsteam Chemical Injectors
Series 6100 Pneumatic Driven Injection Pumps:
- The TXT 6100 Series Pump line consists of a series of basic pump options all developed from a modular power
unit. All units are pneumatically driven positive displacement, single or double acting, reciprocating pumps.
The basic pump is designed for use with three fluid ends, a 1-1/4” and 2-3/4” diameter plunger and a 4” diameter
piston. The fluid ends are interchangeable with the modular power cylinder and can be assembled as single ended
units or double ended units in all combinations of sizes. All fluid ends are designed to withstand maximum output
force of the power cylinder.
Due to the balanced valving of the power cylinder it is, in theory, possible to operate the pump against a back
pressure equal to the inlet power gas pressure; however, a differential in these two pressures must be maintained
for the pump to stroke. (See Power to Fluid Ratio below) When the supply gas is piped off to other areas, the pilot
valves may also be connected to the pump exhaust manifold system.All fluid ends are designed with removable
cartridge type ball check valves. These valves may be replaced without disconnecting the suction and discharge piping.
DESCRIPTION:
Products Also Available From UP&S Inc.
