Texsteam Chemical Injectors
Series 5100 Pneumatic Driven Injection Pumps:
- The 5100 Series Texsteam Chemical Injectors are
single acting, positive displacement plunger-type
pumps, powered by gas via a diaphragm with a
spring return. Speed control is accomplished by
regulating the exhaust gas discharge flow. Reversal is
accomplished by a direct spring- actuated switching
mechanism (rotary three-way valve). Volume is
controlled by the speed of the pump and by the stroke
length, either 1” or 1/3” lengths.
The 5100 Series is capable of pumping high pressures
with gas pressure as low as 8 psi and handling volume
output up to 30 gallons per day.
The pump is lightweight, compact and contains a
minimum of working parts for easy maintenance. Each
fluid pump head is equipped with a stainless steel
plunger, ball checks, ball check springs, top seat, top
bushing, bottom bushing, adjustable VEE type packing
and a priming valve. The packing yoke is equipped
with a drain to monitor for possible packing leaks.
Because of the sealed bearings, the unit is oil-less.
The 5100 Series performs accurately because (1) the
head is designed for high volumetric efficiency, (2)
a positive trip mechanism assures fine control of
plunger stroke length, and (3) the speed is regulated
by controlling the exhaust gas discharge flow which
creates a rapid fluid discharge with slow suction. - The introduction of de-emulsifiers, solvents,
corrosion inhibitors, de-salting agents and
flocculants in oil country operation - High pressure bearing lubrication
- Water treatment
- Blending processes in refining and process plants
- Injection of methanol in gas pipelines
- Hydrostatic testing
- Sampling
DESCRIPTION:
APPLICATIONS:
5100 series brochure
Products Also Available From UP&S Inc.
