Texsteam Chemical Injectors
Series 3700 Pneumatic Driven Injection Pumps:
- Texsteam series 3700 chemical injectors are
pneumatically powered and designed for handling
many types of aqueous solutions and other chemicals.
Single or double-headed units with three volume
adjustments are available in a wide variety of
models. Injection pressure to 1500 psi can be
achieved with air or gas pressure as low as 50 psi.
Units can be furnished with or without reservoirs (5
or 10 gallon. other sizes available upon request).
Texsteam 3700 injectors feature a unitized gas motor
and pump. The gas motor operates in an enclosed
oil bath. All motor and pump parts are fully protected
against dirt and the elements. The 3700 series’
efficient ratchet-type mechanism is noted for its
long-life and accurate control.
- Blending and proportioning chemical compounds
in general process plant operation - Introducing solvents, de-emulsifiers, desalters and
flocculants - High pressure bearing lubrication
- Injection of methanol into gas pipe-lines
- Lubrication of mechanical seals in pumps and
machinery relying upon this type seal - Water treatment
- Corrosion Inhibitor injection
- Sampling
- Introduction of measured quantities of highly toxic
- bactericides
- Both low and high-viscosity fluids and
non-abrasive slurries can be handled with this pump
DESCRIPTION
Features
3700 series brochure
Products Also Available From UP&S Inc.
